T38 Thread Button bits
produkt detail
Bench- en produksjeboarynstruminten omfetsje stangen, skaftadapters, koppelingen en bits. Wy hawwe benammen 9 triedden: R3212, R32, HL38, T38, T45, T51, T60, ST58 en ST68. Se kinne brûkt wurde mei knop bits, cross bits en reaming produkten.
KAT drilling syn wiidweidige oanbod fan bank- en produksje rock drilling ark omfiemet alles út 1 "rope thread apparatuer hielendal oant T60 thread apparatuer, In protte klanten sizze dat de drill roeden, buizen en knop bits binne de bêste op 'e merk hjoed. Litte wy gewoan sizze dat se sille ferbetterje produktiviteit gâns.
KAT T38 Rock drill bits befetsjeFlat Face knop bit, Drop Center knop bit, Retrac knop, T38 Cross bits en ensfh.
Foardielen:
1. De drill bit lichem is makke fan 50R61 stiel
2.De kopkarbid is YK05 of T6
3.Diameter: 57mm-102mm
4.Package: yn houten koffer of yn karton.
5. Produktiviteit: 50000pcs / moanne
Hegere penetraasjerate;
Ferbettere betrouberens;
Langere tsjinst libben.
T38 Knop Bits en Cross bits
T38 Knop bits
Knop bytsje | Carbide diminsje | Ofmjittings D | Flushing gat | |||||
Gauge | Front | |||||||
[Nee.] | [mm] | [Nee.] | [mm] | [mm] | [yn] | Front | Side | |
| 6 | 10 | 3 | 10 | 57 | 2 1/4" | 3 | 1 |
6 | 11 | 3 | 11 | 64 | 2 1/2" | 3 | 1 | |
| 6 | 11 | 3 | 9.5 | 57 | 2 1/4" | 1 | 2 |
6 | 12.7 | 3 | 11 | 64 | 2 1/2" | 1 | 2 | |
| 6 | 12.7 | 3 | 12.7 | 76 | 3" | 3 | 1 |
6 | 14 | 4 | 14 | 89 | 3 1/2" | 3 | 0 | |
| 6 | 12.7 | 5 | 11 | 70 | 2 3/4" | 1 | 2 |
6 | 12.7 | 5 | 11 | 76 | 3" | 1 | 2 | |
| 8 | 10 | 4 | 10 | 64 | 2 1/2" | 2 | 0 |
8 | 10 | 4 | 10 | 70 | 2 3/4" | 2 | 0 | |
| 8 | 11 | 6 | 11 | 76 | 3" | 2 | 0 |
8 | 12.7 | 6 | 12.7 | 89 | 3 1/2" | 2 | 0 | |
8 | 14 | 6 | 14 | 102 | 4" | 2 | 0 | |
8 | 16 | 6 | 14 | 115 | 4 1/2" | 2 | 0 | |
| 9 | 11 | 8 | 10 | 89 | 3 1/2" | 3 | 1 |
9 | 12.7 | 8 | 12.7 | 102 | 4" | 3 | 1 | |
Drop Center | ||||||||
| 6 | 10 | 3/1 | 10/9 | 64 | 2 1/2" | 3 | 0 |
6 | 11 | 3/1 | 11 / 9.5 | 70 | 2 3/4" | 3 | 0 | |
6 | 12.7 | 3/1 | 11 / 9.5 | 76 | 3" | 3 | 0 | |
| 6 | 14 | 3/2 | 12,7 / 9,5 | 89 | 3 1/2" | 3 | 0 |
| 8 | 11 | 4/1 | 10/10 | 76 | 3" | 4 | 0 |
| 8 | 11 | 4/2 | 11 / 9.5 | 89 | 3 1/2" | 4 | 0 |
| 8 | 14 | 4/3 | 12.7 / 11 | 102 | 4" | 4 | 0 |
Flat Face / Retrac | ||||||||
| 6 | 11 | 3 | 9.5 | 57 | 2 1/4" | 1 | 2 |
6 | 12.7 | 3 | 11 | 64 | 2 1/2" | 1 | 2 | |
| 6 | 12.7 | 3 | 11 | 64 | 2 1/2" | 3 | 0 |
6 | 12.7 | 3 | 12.7 | 76 | 3" | 3 | 1 | |
| 6 | 14 | 4 | 14 | 89 | 3 1/2" | 3 | 0 |
| 8 | 10 | 4 | 10 | 64 | 2 1/2" | 2 | 0 |
| 8 | 12.7 | 5 | 10 | 76 | 3" | 4 | 0 |
| 8 | 11 | 6 | 11 | 76 | 3" | 2 | 0 |
8 | 12.7 | 6 | 12.7 | 89 | 3 1/2" | 2 | 0 | |
8 | 14 | 6 | 14 | 102 | 4" | 2 | 1 | |
Drop Center / Retrac | ||||||||
| 6 | 10 | 3/1 | 10/9 | 64 | 2 1/2" | 3 | 0 |
6 | 11 | 3/1 | 11 / 9.5 | 70 | 2 3/4" | 3 | 0 | |
6 | 12.7 | 3/1 | 11 / 9.5 | 76 | 3" | 3 | 0 | |
| 6 | 14 | 3/2 | 12,7 / 9,5 | 89 | 3 1/2" | 3 | 0 |
| 8 | 11 | 4/1 | 10/10 | 76 | 3" | 4 | 0 |
| 8 | 11 | 4/2 | 11 / 9.5 | 89 | 3 1/2" | 4 | 1 |
| 8 | 14 | 4/3 | 12.7 / 11 | 102 | 4" | 4 | 1 |
T38 Cross bits
T38 Cross bit | Carbide diminsje | Ofmjittings D | Flushing gat | |||
Breedte | Hichte | |||||
[mm] | [mm] | [mm] | [yn] | Front | Side | |
| 12.7 | 20.6 | 64 | 2 1/2" | 1 | 4 |
12.7 | 25 | 70 | 2 3/4" | 1 | 4 | |
12.7 | 25 | 76 | 3" | 1 | 4 | |
12.7 | 25 | 89 | 3 1/2" | 1 | 4 | |
16 | 25 | 102 | 4" | 1 | 4 | |
