T38 pìosan Putan Snàthainn
mion-fhiosrachadh toraidh
Tha innealan drileadh beinne agus cinneasachaidh a’ toirt a-steach slatan, innealan-atharrachaidh shank, càraidean agus pìosan. Tha 9 snàithleanan againn sa mhòr-chuid: R3212, R32, HL38, T38, T45, T51, T60, ST58 agus ST68. Faodar an cleachdadh le pìosan putan, pìosan croise agus toraidhean reaming.
Tha an raon farsaing de dh’ innealan drile beinne is cinneasachaidh aig KAT drilling a ’toirt a-steach a h-uile càil bho uidheamachd snàithlean ròpa 1" fad na slighe suas gu uidheamachd snàithlean T60, Tha mòran de luchd-ceannach ag ràdh gur e na slatan drile, na tiùban agus na pìosan putan as fheàrr air a’ mhargaidh an-diugh.
Tha pìosan drile roc KAT T38 a’ toirt a-steachPìos putan Flat Face, bit putan Ionad Drop, putan Retrac, T38 Cross bits is msaa.
Buannachdan:
1. Tha an corp bit drile air a dhèanamh de stàilinn 50R61
2.The ceann carbide tha YK05 no T6
3.Diameter:57mm-102mm
4.Package: ann an cùis fiodha no ann an carton.
5.Productivity: 50000pcs / mìos
Ìre treòrachaidh nas àirde;
Earbsachd nas fheàrr;
Beatha seirbheis nas fhaide.
T38 Putanan Putan agus pìosan croise
Pìosan putan T38
Putan putan | Meud carbide | Meudan D | Toll sruthadh | |||||
Slat-tomhais | Aghaidh | |||||||
[Chan eil.] | [mm] | [Chan eil.] | [mm] | [mm] | [ann an] | Aghaidh | Taobh | |
| 6 | 10 | 3 | 10 | 57 | 2 1/4 ″ | 3 | 1 |
6 | 11 | 3 | 11 | 64 | 2 1/2 ″ | 3 | 1 | |
| 6 | 11 | 3 | 9.5 | 57 | 2 1/4 ″ | 1 | 2 |
6 | 12.7 | 3 | 11 | 64 | 2 1/2 ″ | 1 | 2 | |
| 6 | 12.7 | 3 | 12.7 | 76 | 3 ″ | 3 | 1 |
6 | 14 | 4 | 14 | 89 | 3 1/2 ″ | 3 | 0 | |
| 6 | 12.7 | 5 | 11 | 70 | 2 3/4 ″ | 1 | 2 |
6 | 12.7 | 5 | 11 | 76 | 3 ″ | 1 | 2 | |
| 8 | 10 | 4 | 10 | 64 | 2 1/2 ″ | 2 | 0 |
8 | 10 | 4 | 10 | 70 | 2 3/4 ″ | 2 | 0 | |
| 8 | 11 | 6 | 11 | 76 | 3 ″ | 2 | 0 |
8 | 12.7 | 6 | 12.7 | 89 | 3 1/2 ″ | 2 | 0 | |
8 | 14 | 6 | 14 | 102 | 4" | 2 | 0 | |
8 | 16 | 6 | 14 | 115 | 4 1/2 ″ | 2 | 0 | |
| 9 | 11 | 8 | 10 | 89 | 3 1/2 ″ | 3 | 1 |
9 | 12.7 | 8 | 12.7 | 102 | 4" | 3 | 1 | |
Ionad Drop | ||||||||
| 6 | 10 | 3/1 | 10/9 | 64 | 2 1/2 ″ | 3 | 0 |
6 | 11 | 3/1 | 11/9.5 | 70 | 2 3/4 ″ | 3 | 0 | |
6 | 12.7 | 3/1 | 11/9.5 | 76 | 3 ″ | 3 | 0 | |
| 6 | 14 | 3/2 | 12.7 / 9.5 | 89 | 3 1/2 ″ | 3 | 0 |
| 8 | 11 | 4/1 | 10/10 | 76 | 3 ″ | 4 | 0 |
| 8 | 11 | 4/2 | 11/9.5 | 89 | 3 1/2 ″ | 4 | 0 |
| 8 | 14 | 4/3 | 12.7/11 | 102 | 4" | 4 | 0 |
Aghaidh chòmhnard / Retrac | ||||||||
| 6 | 11 | 3 | 9.5 | 57 | 2 1/4 ″ | 1 | 2 |
6 | 12.7 | 3 | 11 | 64 | 2 1/2 ″ | 1 | 2 | |
| 6 | 12.7 | 3 | 11 | 64 | 2 1/2 ″ | 3 | 0 |
6 | 12.7 | 3 | 12.7 | 76 | 3 ″ | 3 | 1 | |
| 6 | 14 | 4 | 14 | 89 | 3 1/2 ″ | 3 | 0 |
| 8 | 10 | 4 | 10 | 64 | 2 1/2 ″ | 2 | 0 |
| 8 | 12.7 | 5 | 10 | 76 | 3 ″ | 4 | 0 |
| 8 | 11 | 6 | 11 | 76 | 3 ″ | 2 | 0 |
8 | 12.7 | 6 | 12.7 | 89 | 3 1/2 ″ | 2 | 0 | |
8 | 14 | 6 | 14 | 102 | 4" | 2 | 1 | |
Ionad Drop / Retrac | ||||||||
| 6 | 10 | 3/1 | 10/9 | 64 | 2 1/2 ″ | 3 | 0 |
6 | 11 | 3/1 | 11/9.5 | 70 | 2 3/4 ″ | 3 | 0 | |
6 | 12.7 | 3/1 | 11/9.5 | 76 | 3 ″ | 3 | 0 | |
| 6 | 14 | 3/2 | 12.7 / 9.5 | 89 | 3 1/2 ″ | 3 | 0 |
| 8 | 11 | 4/1 | 10/10 | 76 | 3 ″ | 4 | 0 |
| 8 | 11 | 4/2 | 11/9.5 | 89 | 3 1/2 ″ | 4 | 1 |
| 8 | 14 | 4/3 | 12.7/11 | 102 | 4" | 4 | 1 |
T38 Pìosan croise
T38 crois-phìos | Meud carbide | Meudan D | Toll sruthadh | |||
Leud | Àirde | |||||
[mm] | [mm] | [mm] | [ann an] | Aghaidh | Taobh | |
| 12.7 | 20.6 | 64 | 2 1/2 ″ | 1 | 4 |
12.7 | 25 | 70 | 2 3/4 ″ | 1 | 4 | |
12.7 | 25 | 76 | 3 ″ | 1 | 4 | |
12.7 | 25 | 89 | 3 1/2 ″ | 1 | 4 | |
16 | 25 | 102 | 4" | 1 | 4 | |
