T38 Thread Button bits
detalye ng produkto
Kasama sa bench at production drilling tool ang mga rod, shank adapter, coupling at bits. Marami kaming 9 na thread: R3212, R32, HL38, T38, T45, T51, T60, ST58 at ST68. Magagamit ang mga ito sa mga buton bit, cross bit at reaming na mga produkto.
Kasama sa komprehensibong hanay ng mga bench at production rock drilling tool ng KAT drilling ang lahat mula sa 1” rope thread equipment hanggang sa T60 thread equipment, Maraming mga customer ang nagsasabi na ang drill rods, tubes at button bits ay ang pinakamahusay sa merkado ngayon. Sabihin na lang na mapapabuti nila nang malaki ang productivity.
Kasama sa KAT T38 Rock drill bitsFlat Face button bit, Drop Center button bit, Retrac button, T38 Cross bits at iba pa.
Mga kalamangan:
1. Ang drill bit body ay gawa sa 50R61 steel
2. Ang head carbide ay YK05 o T6
3.Diameter:57mm-102mm
4.Package:sa kahoy na kaso o sa karton.
5.Productivity:50000pcs/buwan
Mas mataas na rate ng pagtagos;
Pinahusay na pagiging maaasahan;
Mas mahabang buhay ng serbisyo.
T38 Button Bits at Cross bits
T38 Button bits
Button bit | Sukat ng karbida | Mga sukat D | Flushing hole | |||||
Gauge | harap | |||||||
[Hindi.] | [mm] | [Hindi.] | [mm] | [mm] | [sa] | harap | Gilid | |
| 6 | 10 | 3 | 10 | 57 | 2 1/4″ | 3 | 1 |
6 | 11 | 3 | 11 | 64 | 2 1/2″ | 3 | 1 | |
| 6 | 11 | 3 | 9.5 | 57 | 2 1/4″ | 1 | 2 |
6 | 12.7 | 3 | 11 | 64 | 2 1/2″ | 1 | 2 | |
| 6 | 12.7 | 3 | 12.7 | 76 | 3″ | 3 | 1 |
6 | 14 | 4 | 14 | 89 | 3 1/2″ | 3 | 0 | |
| 6 | 12.7 | 5 | 11 | 70 | 2 3/4″ | 1 | 2 |
6 | 12.7 | 5 | 11 | 76 | 3″ | 1 | 2 | |
| 8 | 10 | 4 | 10 | 64 | 2 1/2″ | 2 | 0 |
8 | 10 | 4 | 10 | 70 | 2 3/4″ | 2 | 0 | |
| 8 | 11 | 6 | 11 | 76 | 3″ | 2 | 0 |
8 | 12.7 | 6 | 12.7 | 89 | 3 1/2″ | 2 | 0 | |
8 | 14 | 6 | 14 | 102 | 4″ | 2 | 0 | |
8 | 16 | 6 | 14 | 115 | 4 1/2″ | 2 | 0 | |
| 9 | 11 | 8 | 10 | 89 | 3 1/2″ | 3 | 1 |
9 | 12.7 | 8 | 12.7 | 102 | 4″ | 3 | 1 | |
Drop Center | ||||||||
| 6 | 10 | 3/1 | 10/9 | 64 | 2 1/2″ | 3 | 0 |
6 | 11 | 3/1 | 11 / 9.5 | 70 | 2 3/4″ | 3 | 0 | |
6 | 12.7 | 3/1 | 11 / 9.5 | 76 | 3″ | 3 | 0 | |
| 6 | 14 | 3/2 | 12.7 / 9.5 | 89 | 3 1/2″ | 3 | 0 |
| 8 | 11 | 4/1 | 10/10 | 76 | 3″ | 4 | 0 |
| 8 | 11 | 4/2 | 11 / 9.5 | 89 | 3 1/2″ | 4 | 0 |
| 8 | 14 | 4/3 | 12.7 / 11 | 102 | 4″ | 4 | 0 |
Patag na Mukha / Retrac | ||||||||
| 6 | 11 | 3 | 9.5 | 57 | 2 1/4″ | 1 | 2 |
6 | 12.7 | 3 | 11 | 64 | 2 1/2″ | 1 | 2 | |
| 6 | 12.7 | 3 | 11 | 64 | 2 1/2″ | 3 | 0 |
6 | 12.7 | 3 | 12.7 | 76 | 3″ | 3 | 1 | |
| 6 | 14 | 4 | 14 | 89 | 3 1/2″ | 3 | 0 |
| 8 | 10 | 4 | 10 | 64 | 2 1/2″ | 2 | 0 |
| 8 | 12.7 | 5 | 10 | 76 | 3″ | 4 | 0 |
| 8 | 11 | 6 | 11 | 76 | 3″ | 2 | 0 |
8 | 12.7 | 6 | 12.7 | 89 | 3 1/2″ | 2 | 0 | |
8 | 14 | 6 | 14 | 102 | 4″ | 2 | 1 | |
Drop Center / Retrac | ||||||||
| 6 | 10 | 3/1 | 10/9 | 64 | 2 1/2″ | 3 | 0 |
6 | 11 | 3/1 | 11 / 9.5 | 70 | 2 3/4″ | 3 | 0 | |
6 | 12.7 | 3/1 | 11 / 9.5 | 76 | 3″ | 3 | 0 | |
| 6 | 14 | 3/2 | 12.7 / 9.5 | 89 | 3 1/2″ | 3 | 0 |
| 8 | 11 | 4/1 | 10/10 | 76 | 3″ | 4 | 0 |
| 8 | 11 | 4/2 | 11 / 9.5 | 89 | 3 1/2″ | 4 | 1 |
| 8 | 14 | 4/3 | 12.7 / 11 | 102 | 4″ | 4 | 1 |
T38 Cross bits
T38 Cross bit | Sukat ng karbida | Mga sukat D | Flushing hole | |||
Lapad | taas | |||||
[mm] | [mm] | [mm] | [sa] | harap | Gilid | |
| 12.7 | 20.6 | 64 | 2 1/2″ | 1 | 4 |
12.7 | 25 | 70 | 2 3/4″ | 1 | 4 | |
12.7 | 25 | 76 | 3″ | 1 | 4 | |
12.7 | 25 | 89 | 3 1/2″ | 1 | 4 | |
16 | 25 | 102 | 4″ | 1 | 4 | |
