12 1/4″ Rock Bits R.C DTH Hammer – Kat
12 1/4″ Rock Bits R.C DTH Hammer – Kat Detail:
I .Introduction ofR.C. Drilling
R.C. drilling, referred to as “Centre Sample Recovery”or “Dual Wall Drilling”, employs a Dual Wall Pipe where the drilling medium, normally high pressure air, is passed between the outer and inner tubes down to the face o# the drilling bit where it is returned up the centre tube along with the sample cut by the drill bit.
Ⅱ . The use and the advantages of the R.C. DTH Hammer:
The R.C. System collects sample through the recovery holes in the face of the drill bit immediately as the cuttings or sample is formed. The drilled sample does not have to travel the length of the hammer where contamination and loss ofsample takes place.
2) Higher Production
In broken and fractured ground conditions, the R.C. will often out perform the conventional hammer in terms ofpenetratiion rates.
3) Dry Sample
Even in certain water bearing stratas it is still possible to collect a dry sample because the cuttings (sample) are collected as they are formed through the face of the drill bit.
4) Higher Sample Recovery
Because the sample is collected through the face of the drill bit there is no loss of sample when drilling through broken or fractured ground. And since the bit matched to the chuck size, there is very little bypass of sample and recovery rates o, up to 98% are generally achievable.
Product detail pictures:
Related Product Guide:
Common Tools or Ancient Advanced Technology? How Did the Egyptians Bore Through Granite? | Guide Tube Gt60
Minister launches projects in Mangwe | Carbide Cylindrical Pin
Our development depends on the advanced equipment, excellent talents and continuously strengthened technology forces for 12 1/4″ Rock Bits R.C DTH Hammer – Kat, The product will supply to all over the world, such as: Adelaide, kazakhstan, Honduras, We now have established long-term, stable and good business relationships with many manufacturers and wholesalers around the world. Currently, we've been looking forward to even greater cooperation with overseas customers based on mutual benefits. You should feel free to contact us for more details.
By Nana from New Delhi - 2015.11.06 10:04
We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.
By Penelope from Barcelona - 2016.11.12 12:31