Best-Selling Air Compressor Hammer Rock Drill - R.C DTH Hammer – Kat
Best-Selling Air Compressor Hammer Rock Drill - R.C DTH Hammer – Kat Detail:
I .Introduction ofR.C. Drilling
R.C. drilling, referred to as “Centre Sample Recovery”or “Dual Wall Drilling”, employs a Dual Wall Pipe where the drilling medium, normally high pressure air, is passed between the outer and inner tubes down to the face o# the drilling bit where it is returned up the centre tube along with the sample cut by the drill bit.
Ⅱ . The use and the advantages of the R.C. DTH Hammer:
The R.C. System collects sample through the recovery holes in the face of the drill bit immediately as the cuttings or sample is formed. The drilled sample does not have to travel the length of the hammer where contamination and loss ofsample takes place.
2) Higher Production
In broken and fractured ground conditions, the R.C. will often out perform the conventional hammer in terms ofpenetratiion rates.
3) Dry Sample
Even in certain water bearing stratas it is still possible to collect a dry sample because the cuttings (sample) are collected as they are formed through the face of the drill bit.
4) Higher Sample Recovery
Because the sample is collected through the face of the drill bit there is no loss of sample when drilling through broken or fractured ground. And since the bit matched to the chuck size, there is very little bypass of sample and recovery rates o, up to 98% are generally achievable.
Product detail pictures:
Related Product Guide:
Boreholes run dry, feed runs low and fields turn yellow… farmers go extra mile to keep their animals fed and watered | Carbide Cylindrical Pin
Disappointment for Cumbrian hammer thrower Nick Miller at the European Athletics Championships | Rock Drill Bit Grinding Machine
Our firm sticks on the theory of "Quality will be the life in the enterprise, and status could be the soul of it" for Best-Selling Air Compressor Hammer Rock Drill - R.C DTH Hammer – Kat, The product will supply to all over the world, such as: Mozambique , Curacao , Iceland , We always insist on the management tenet of "Quality is first, Technology is basis, Honesty and Innovation".We are able to develop new products continuously to a higher level to satisfy different needs of customers.
By Alva from Peru - 2015.06.12 16:22
The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
By Edwina from Argentina - 2015.05.15 10:52