Drilling Hammer R.C DTH Hammer – Kat
Drilling Hammer R.C DTH Hammer – Kat Detail:
I .Introduction ofR.C. Drilling
R.C. drilling, referred to as “Centre Sample Recovery”or “Dual Wall Drilling”, employs a Dual Wall Pipe where the drilling medium, normally high pressure air, is passed between the outer and inner tubes down to the face o# the drilling bit where it is returned up the centre tube along with the sample cut by the drill bit.
Ⅱ . The use and the advantages of the R.C. DTH Hammer:
The R.C. System collects sample through the recovery holes in the face of the drill bit immediately as the cuttings or sample is formed. The drilled sample does not have to travel the length of the hammer where contamination and loss ofsample takes place.
2) Higher Production
In broken and fractured ground conditions, the R.C. will often out perform the conventional hammer in terms ofpenetratiion rates.
3) Dry Sample
Even in certain water bearing stratas it is still possible to collect a dry sample because the cuttings (sample) are collected as they are formed through the face of the drill bit.
4) Higher Sample Recovery
Because the sample is collected through the face of the drill bit there is no loss of sample when drilling through broken or fractured ground. And since the bit matched to the chuck size, there is very little bypass of sample and recovery rates o, up to 98% are generally achievable.
Product detail pictures:
Related Product Guide:
Rangers and Round Rock Express parting ways | Guide Tube Gt60
No surprise Donkin mine is subject to rock falls, experts say | Carbide Cylindrical Pin
Adhering to your principle of "quality, assistance, performance and growth", we have now gained trusts and praises from domestic and international customer for Drilling Hammer R.C DTH Hammer – Kat, The product will supply to all over the world, such as: South Africa, Liverpool, Austria, We have more than 10 years exported experience and our products have expored more than 30 countries around the word . We always hold the service tenet Client first,Quality first in our mind,and are strict with product quality. Welcome your visiting!
By Monica from Eindhoven - 2016.01.28 19:59
This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
By Arthur from Miami - 2015.09.16 11:31