Factory wholesale Atlas Copco Tophammer Rods And Tubes - R.C DTH Hammer – Kat
Factory wholesale Atlas Copco Tophammer Rods And Tubes - R.C DTH Hammer – Kat Detail:
I .Introduction ofR.C. Drilling
R.C. drilling, referred to as “Centre Sample Recovery”or “Dual Wall Drilling”, employs a Dual Wall Pipe where the drilling medium, normally high pressure air, is passed between the outer and inner tubes down to the face o# the drilling bit where it is returned up the centre tube along with the sample cut by the drill bit.
Ⅱ . The use and the advantages of the R.C. DTH Hammer:
The R.C. System collects sample through the recovery holes in the face of the drill bit immediately as the cuttings or sample is formed. The drilled sample does not have to travel the length of the hammer where contamination and loss ofsample takes place.
2) Higher Production
In broken and fractured ground conditions, the R.C. will often out perform the conventional hammer in terms ofpenetratiion rates.
3) Dry Sample
Even in certain water bearing stratas it is still possible to collect a dry sample because the cuttings (sample) are collected as they are formed through the face of the drill bit.
4) Higher Sample Recovery
Because the sample is collected through the face of the drill bit there is no loss of sample when drilling through broken or fractured ground. And since the bit matched to the chuck size, there is very little bypass of sample and recovery rates o, up to 98% are generally achievable.
Product detail pictures:
Related Product Guide:
Stunning 3D Rock Images Revealed in New Lab Live Science Live Science | Carbide Cylindrical Pin
Gigaom | Rc Dth Hammer
While using the "Client-Oriented" organization philosophy, a rigorous top quality command process, highly developed production devices and a potent R&D workforce, we normally provide high quality products, outstanding solutions and aggressive charges for Factory wholesale Atlas Copco Tophammer Rods And Tubes - R.C DTH Hammer – Kat, The product will supply to all over the world, such as: Burundi , Romania , Barcelona , Since always, we adhering to the "open and fair, share to get, the pursuit of excellence, and creation of value"values, adhere to the"integrity and efficient, trade-oriented, best way , best valve" business philosophy. Together with our all over the world have branches and partners to develop new business areas, maximum common values. We sincerely welcome and together we share in global resources, opening up new career together with the chapter.
By Chris from Angola - 2015.06.19 10:42
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Sally from Mongolia - 2015.02.12 14:52