Hot New Products Chisel Bit Sharpen Grinding Machine - R.C DTH Hammer – Kat

Short Description:

I .Introduction ofR.C. Drilling R.C. drilling, referred to as “Centre Sample Recovery”or “Dual Wall Drilling”, employs a Dual Wall Pipe where the drilling medium, normally high pressure air, is passed between the outer and inner tubes down to the face o# the drilling bit where it is returned up the centre tube along with the sample cut by the drill bit. Ⅱ . The use and the advantages of the R.C. DTH Hammer: 1)No Contamination The R.C. System collects sample through the...


Product Detail

Product Tags

Related Video

Feedback (2)

We usually think and practice corresponding for the change of circumstance, and grow up. We aim at the achievement of a richer mind and body as well as the living for QL60 , drill rod , Integral Equipment , We feel that our warm and professional support will bring you pleasant surprises as perfectly as fortune.
Hot New Products Chisel Bit Sharpen Grinding Machine - R.C DTH Hammer – Kat Detail:

I .Introduction ofR.C. Drilling

R.C. drilling, referred to as “Centre Sample Recovery”or “Dual Wall Drilling”, employs a Dual Wall Pipe where the drilling medium, normally high pressure air, is passed between the outer and inner tubes down to the face o# the drilling bit where it is returned up the centre tube along with the sample cut by the drill bit.

Ⅱ . The use and the advantages of the R.C. DTH Hammer:

1)No Contamination

The R.C. System collects sample through the recovery holes in the face of the drill bit immediately as the cuttings or sample is formed. The drilled sample does not have to travel the length of the hammer where contamination and loss ofsample takes place.

2) Higher Production

In broken and fractured ground conditions, the R.C. will often out perform the conventional hammer in terms ofpenetratiion rates.

3) Dry Sample

Even in certain water bearing stratas it is still possible to collect a dry sample because the cuttings (sample) are collected as they are formed through the face of the drill bit.

4) Higher Sample Recovery

Because the sample is collected through the face of the drill bit there is no loss of sample when drilling through broken or fractured ground. And since the bit matched to the chuck size, there is very little bypass of sample and recovery rates o, up to 98% are generally achievable.


Product detail pictures:

Hot New Products Chisel Bit Sharpen Grinding Machine -
 R.C DTH Hammer – Kat detail pictures

Hot New Products Chisel Bit Sharpen Grinding Machine -
 R.C DTH Hammer – Kat detail pictures


Related Product Guide:
Water, water everywhere but hardly any to drink in South-East | Rc Dth Hammer
Matt Murray is back at practice and ‘getting really close’ | Borehole Hammer

We emphasize progress and introduce new solutions into the market each year for Hot New Products Chisel Bit Sharpen Grinding Machine - R.C DTH Hammer – Kat, The product will supply to all over the world, such as: Mecca , Congo , Naples , "Good quality and reasonable price" are our business principles. If you are interested in our products or have any questions, please feel free to contact us. We hope to establish cooperative relationships with you in the near future.
  • Goods just received, we are very satisfied, a very good supplier, hope to make persistent efforts to do better.
    5 Stars By Jenny from UK - 2016.10.25 15:53
    Superb technology, perfect after-sales service and efficient work efficiency, we think this is our best choice.
    5 Stars By Louis from Denmark - 2016.12.02 14:11

    Related Products

    WhatsApp Online Chat !