Inkqubo ye-ankile yokuzibhobhoza-R38
iinkcukacha zemveliso
I-ankile isetyenziswa kakhulu kwitonela yenkxaso yangaphambili, ithambeka, unxweme, umgodi, iiprojekthi zogcino lwamanzi, isiseko sokwakha, ukuqinisa umandlalo wendlela kunye nonyango olungalunganga lwejoloji olufana ne-landslip, crack, kunye neminyaka yokutshona, ayinakuphinda ibuyiselwe kwindawo yolwakhiwo olumxinwa.
AMALUNGELO
Inkqubo yeAnchor ye-Anchor yokuZimbela:
Iqulathe umngxunya webha enemisonto edityaniswe nentwana yedrili eyenza ukomba. Ibha enombhobho ivumela umoya kunye namanzi ukuba badlule ngokukhululekileyo kwi-bar ngexesha lokugaya ukususa i-debris, emva kokuba u-drilling ubunzulu obufunekayo bugqityiwe, i-grout igcwalisa ibha engenanto ngoxinzelelo lweemfuno zabo kwaye igubungele ngokupheleleyo i-bolt yonke.
Isibini:
I-coupler ingasetyenziselwa ukudibanisa imivalo engenanto kunye nokwandisa ubude bebholiti, oko kuthetha ukuba i-ankile inokwandiswa kunye nee-couplers.
Ipleyiti kunye namantongomane :
I-plate kunye ne-nut zifakwe ngokwemfuno yazo yoyilo.
Isuntswana le-Drill:
I-drill bit iya kukhethwa ekukhetheni imeko yomhlaba.
Ibha yeAnchor eHollow | |||||
Ubungakanani | Dia yangaphandle. | Ngaphakathi Kuye. | Umthwalo wokugqibela | Yield Load | Ubunzima |
(mm) | (mm) | (kN) | (kN) | (Kg/m) | |
S-R38/20 | 38 | 20 | 500 | 400 | 5.5 |
E-R38/22 | 38 | 22 | 500 | 400 | 4.95 |
E-R38/18 | 38 | 18 | 550 | 430 | 6 |
C-R38/22.5 | 38 | 22.5 | 500 | 400 | 4.8 |
C-R38/21 | 38 | 21 | 500 | 400 | 5.25 |
Umlingane | ||||
Ubungakanani | Dia yangaphandle. | Ubude | Ubunzima | Phawula |
(mm) | (mm) | (Kg/pc) | ||
S-R38 | 51 | 180 | 1.33 | Ngesakhiwo sokutywina |
51 | 200 | 1.5 | ||
51 | 220 | 1.67 | ||
E-R38 | 51 | 180 | 1.38 | Ngaphandle kwesakhiwo sokutywina |
51 | 200 | 1.55 | ||
51 | 220 | 1.68 | ||
I-Drill Bit | |||
Uhlobo | Dia yangaphandle. | Ubunzima | Uluhlu lweSicelo (Iingcebiso) |
(mm) | (Ikg) | ||
Steel cross bit | 76 mm | 1.2 | Isuntswana lesiphambano esiqinileyo ukuze sikhululeke ukuya kwiimeko ezixineneyo ezinamatye amancinci |
90 mm | 1.4 | ||
Steel arched bit | 76 mm | 1.2 | Isuntswana le-arched arched for optimized geometry kumhlaba ongadityaniswanga onamatye amancinci |
TC arched bit | 115 mm | 2.85 | I-TC i-arched bit yejometri ephuculweyo yokwakheka kwamatye athambileyo ukuya aphakathi |
TC umnqamlezo bit | 76 mm | 1.25 | I-TC cross bit yolwakhiwo oluthambileyo ukuya oluphakathi |
90 mm | 1.45 | ||
TC 3 cutter bit | 76 mm | 0.85 | I-TC ifake isuntswana kulwakhiwo oluthambileyo ukuya oluphakathi |
Steel iqhosha bit | 76 mm | 1 | Intwana yeqhosha eliqinileyo lelitye elingadityaniswanga elinamatye |
bit iqhosha le-TC | 76 mm | 1 | I-TC ifake iqhosha elincinci lolwakhiwo oluphakathi |
Hex Nut | ||||
Ubungakanani | Ubungakanani obungundoqo | Ubude | Ubunzima | Ukuqina |
(mm) | (mm) | (Kg/pc) | (HRC) | |
S-R38 | 50 | 60 | 1.47 | 25-30 |
Ipleyiti eDomed | ||||
Ubungakanani | Imilinganiselo | Ukutyeba | Usuku lomngxuma. | Ubunzima |
(mm) | (mm) | (mm) | (Kg/pc) | |
E-R38 | 150×150 | 8 | 41 | 3.6 |
200×200 | 12 | 41 | 1.38 | |
Ipleyiti yeAnchor | ||||
Ubungakanani | Imilinganiselo | Ukutyeba | Usuku lomngxuma. | Ubunzima |
(mm) | (mm) | (mm) | (Kg/pc) | |
E-R38 | 140×140 | 35 | 41 | 5 |
150×150 | 25 | 41 | 4.1 | |
200×200 | 12 | 41 | 3.67 | |