Inkqubo ye-ankile yokuzenzela-R51
iinkcukacha zemveliso
I-ankile isetyenziswa kakhulu kwitonela yenkxaso yangaphambili, ithambeka, unxweme, umgodi, iiprojekthi zogcino lwamanzi, isiseko sokwakha, ukuqinisa umandlalo wendlela kunye nonyango olungalunganga lwejoloji olufana ne-landslip, crack, kunye neminyaka yokutshona, ayinakuphinda ibuyiselwe kwindawo yolwakhiwo olumxinwa.
AMALUNGELO
Inkqubo yeAnchor ye-Anchor yokuZimbela:
Iqulathe umngxunya webha enemisonto edityaniswe nentwana yedrili eyenza ukomba. Ibha enombhobho ivumela umoya kunye namanzi ukuba badlule ngokukhululekileyo kwi-bar ngexesha lokugaya ukususa i-debris, emva kokuba u-drilling ubunzulu obufunekayo bugqityiwe, i-grout igcwalisa ibha engenanto ngoxinzelelo lweemfuno zabo kwaye igubungele ngokupheleleyo i-bolt yonke.
Isibini:
I-coupler ingasetyenziselwa ukudibanisa imivalo engenanto kunye nokwandisa ubude bebholiti, oko kuthetha ukuba i-ankile inokwandiswa kunye nee-couplers.
Ipleyiti kunye namantongomane :
I-plate kunye ne-nut zifakwe ngokwemfuno yazo yoyilo.
Isuntswana le-Drill:
I-drill bit iya kukhethwa ekukhetheni imeko yomhlaba.
Ibha yeAnchor eHollow | |||||
Ubungakanani | Dia yangaphandle. | Ngaphakathi Kuye. | Umthwalo wokugqibela | Yield Load | Ubunzima |
(mm) | (mm) | (kN) | (kN) | (Kg/m) | |
S-R51/34 | 51 | 34 | 580 | 450 | 6.95 |
S-R51/29 | 51 | 29 | 800 | 630 | 9 |
E-R51/36 | 51 | 36 | 550 | 430 | 6.15 |
E-R51/35 | 51 | 35 | 580 | 450 | 6.4 |
E-R51/31 | 51 | 31 | 800 | 630 | 8.2 |
C-R51/33 | 51 | 33 | 800 | 630 | 8 |
Umlingane | ||||
Ubungakanani | Dia yangaphandle. | Ubude | Ubunzima | Phawula |
(mm) | (mm) | (Kg/pc) | ||
S-R51 | 63 | 200 | 1.85 | Ngesakhiwo sokutywina |
63 | 220 | 2 | ||
E-R51 | 63 | 200 | 1.84 | Ngaphandle kwesakhiwo sokutywina |
63 | 220 | 2.13 | ||
I-Drill Bit | |||
Uhlobo | Dia yangaphandle. | Ubunzima | Uluhlu lweSicelo (Iingcebiso) |
(mm) | (Ikg) | ||
Steel cross bit | R51/85 mm | 1.3 | Isuntswana lesiphambano esiqinileyo ukuze sikhululeke ukuya kwiimeko ezixineneyo ezinamatye amancinci |
TC umnqamlezo bit | R51/115 mm | 1.8 | I-TC cross bit yolwakhiwo oluthambileyo ukuya oluphakathi |
Steel iqhosha bit | R51/100 mm | 1.85 | I-TC faka isuntswana leqhosha lelitye elingadityaniswanga elinamatye |
R51/115 mm | 2 | ||
bit iqhosha le-TC | R51/100 mm | 1.85 | I-TC ifake iqhosha elincinci lolwakhiwo oluphakathi |
Hex Nut | ||||
Ubungakanani | Ubungakanani obungundoqo | Ubude | Ubunzima | Ukuqina |
(mm) | (mm) | (Kg/pc) | (HRC) | |
S-R51 | 75 | 70 | 1.53 | 25-30 |
75 | 80 | 1.84 | ||
Ipleyiti eDomed | ||||
Ubungakanani | Imilinganiselo | Ukutyeba | Usuku lomngxuma. | Ubunzima |
(mm) | (mm) | (mm) | (Kg/pc) | |
E-R38 | 200×200 | 15 | 55 | 4.7 |
Ipleyiti yeAnchor | ||||
Ubungakanani | Imilinganiselo | Ukutyeba | Usuku lomngxuma. | Ubunzima |
(mm) | (mm) | (mm) | (Kg/pc) | |
E-R51 | 150×150 | 40 | 56 | 6.2 |
180×180 | 45 | 56 | 10.5 | |
200×200 | 30 | 60 | 8.72 | |
250×250 | 40 | 60 | 18.9 | |