Inkqubo ye-anchor yokuzenzela-T30
iinkcukacha zemveliso
I-ankile isetyenziswa kakhulu kwitonela yenkxaso yangaphambili, ithambeka, unxweme, umgodi, iiprojekthi zogcino lwamanzi, isiseko sokwakha, ukuqinisa umandlalo wendlela kunye nonyango olungalunganga lwejoloji olufana ne-landslip, crack, kunye neminyaka yokutshona, ayinakuphinda ibuyiselwe kwindawo yolwakhiwo olumxinwa.
AMALUNGELO
Inkqubo yeAnchor ye-Anchor yokuZimbela:
Iqulathe umngxunya webha enemisonto edityaniswe nentwana yedrili eyenza ukomba. Ibha enombhobho ivumela umoya kunye namanzi ukuba badlule ngokukhululekileyo kwi-bar ngexesha lokugaya ukususa i-debris, emva kokuba u-drilling ubunzulu obufunekayo bugqityiwe, i-grout igcwalisa ibha engenanto ngoxinzelelo lweemfuno zabo kwaye igubungele ngokupheleleyo i-bolt yonke.
Isibini:
I-coupler ingasetyenziselwa ukudibanisa imivalo engenanto kunye nokwandisa ubude bebholiti, oko kuthetha ukuba i-ankile inokwandiswa kunye nee-couplers.
Ipleyiti kunye namantongomane :
I-plate kunye ne-nut zifakwe ngokwemfuno yazo yoyilo.
Isuntswana le-Drill:
I-drill bit iya kukhethwa ekukhetheni imeko yomhlaba.
Ibha yeAnchor eHollow | |||||
Ubungakanani | Dia yangaphandle. | Ngaphakathi Kuye. | Umthwalo wokugqibela | Yield Load | Ubunzima |
(mm) | (mm) | (kN) | (kN) | (Kg/m) | |
S-T30/16 | 30 | 16 | 220 | 180 | 2.9 |
S-T30/14 | 30 | 14 | 260 | 220 | 3.35 |
S-T30/11 | 30 | 11 | 320 | 260 | 3.6 |
E-T30/14 | 30 | 14 | 320 | 260 | 3.35 |
Umlingane | ||||
Ubungakanani | Dia yangaphandle. | Ubude | Ubunzima | Phawula |
(mm) | (mm) | (Kg/pc) | ||
S-T30 | 38 | 105 | 0.39 | Ngesakhiwo sokutywina |
E-T30 | 38 | 105 | 0.45 | Ngaphandle kwesakhiwo sokutywina |
I-Drill Bit | |||
Uhlobo | Dia yangaphandle. | Ubunzima | Uluhlu lweSicelo (Iingcebiso) |
(mm) | (Ikg) | ||
Umnqamlezo owenziwe lukhuni | 42mm | 0.30kg | Isuntswana lesiphambano esiqinileyo ukuze sikhululeke ukuya kwiimeko ezixineneyo zomhlaba |
46mm | 0.32kg | ||
51mm | 0.40kg | ||
76mm | 0.56kg | ||
TC umnqamlezo bit | 42mm | 0.30kg | I-TC cross bit yolwakhiwo oluthambileyo ukuya oluphakathi |
46mm | 0.32kg | ||
51mm | 0.40kg | ||
Isuntswana leqhosha eliqinileyo | 42mm | 0.30kg | Intwana yeqhosha eliqinileyo lelitye elingadityaniswanga elinamatye |
46mm | 0.32kg | ||
51mm | 0.40kg | ||
bit iqhosha le-TC | 46mm | 0.45kg | Iqhosha le-TC elincinci lolwakhiwo oluphakathi lwamatye |
51mm | 0.69kg | ||
Hex Nut | ||||
Ubungakanani | Ubungakanani obungundoqo | Ubude | Ubunzima | Ukuqina |
(mm) | (mm) | (Kg/pc) | (HRC) | |
S-T30 | 46 | 35 | 0.31 | 25-30 |
I-Spherical Collar Nut | ||||
Ubungakanani | Imilinganiselo | Ukutyeba | Usuku lomngxuma. | Ubunzima |
(mm) | (mm) | (mm) | (Kg/pc) | |
S-T30 | 46 | 35 | 0.33 | 290-340 |
Ipleyiti yeAnchor | ||||
Ubungakanani | Imilinganiselo | Ukutyeba | Usuku lomngxuma. | Ubunzima |
(mm) | (mm) | (mm) | (Kg/pc) | |
S-T30 | 150×150 | 25 | 40 | 4.2 |
200×200 | 8 | 36 | 2.43 | |