Inkqubo ye-ancho yokuzibhobhoza-T40
iinkcukacha zemveliso
I-ankile isetyenziswa kakhulu kwitonela yenkxaso yangaphambili, ithambeka, unxweme, umgodi, iiprojekthi zogcino lwamanzi, isiseko sokwakha, ukuqinisa umandlalo wendlela kunye nonyango olungalunganga lwejoloji olufana ne-landslip, crack, kunye neminyaka yokutshona, ayinakuphinda ibuyiselwe kwindawo yolwakhiwo olumxinwa.
AMALUNGELO
Inkqubo yeAnchor ye-Anchor yokuZimbela:
Iqulathe umngxunya webha enemisonto edityaniswe nentwana yedrili eyenza ukomba. Ibha enombhobho ivumela umoya kunye namanzi ukuba badlule ngokukhululekileyo kwi-bar ngexesha lokugaya ukususa i-debris, emva kokuba u-drilling ubunzulu obufunekayo bugqityiwe, i-grout igcwalisa ibha engenanto ngoxinzelelo lweemfuno zabo kwaye igubungele ngokupheleleyo i-bolt yonke.
Isibini:
I-coupler ingasetyenziselwa ukudibanisa imivalo engenanto kunye nokwandisa ubude bebholiti, oko kuthetha ukuba i-ankile inokwandiswa kunye nee-couplers.
Ipleyiti kunye namantongomane :
I-plate kunye ne-nut zifakwe ngokwemfuno yazo yoyilo.
Isuntswana le-Drill:
I-drill bit iya kukhethwa ekukhetheni imeko yomhlaba.
Ibha yeAnchor eHollow | |||||
Ubungakanani | Dia yangaphandle. | Ngaphakathi Kuye. | Umthwalo wokugqibela | Yield Load | Ubunzima |
(mm) | (mm) | (kN) | (kN) | (Kg/m) | |
S-T40/20 | 40 | 20 | 539 | 430 | 6.2 |
S-T40/16 | 40 | 16 | 660 | 525 | 7.2 |
E-T40/22 | 40 | 22 | 539 | 430 | 5.7 |
E-T40/18 | 40 | 18 | 660 | 525 | 6.8 |
Umlingane | ||||
Ubungakanani | Dia yangaphandle. | Ubude | Ubunzima | Phawula |
(mm) | (mm) | (Kg/pc) | ||
S-T40 | 54 | 140 | 1.09 | Ngesakhiwo sokutywina |
57 | 140 | 1.37 | ||
E-T40 | 54 | 140 | 1.11 | Ngaphandle kwesakhiwo sokutywina |
57 | 140 | 1.39 | ||
I-Drill Bit | |||
Uhlobo | Dia yangaphandle. | Ubunzima | Uluhlu lweSicelo (Iingcebiso) |
(mm) | (Ikg) | ||
Umnqamlezo owenziwe lukhuni | 76mm | 0.90kg | Isuntswana lesiphambano esiqinileyo ukuze sikhululeke ukuya kwiimeko ezixineneyo zomhlaba |
90mm | 1.5kg | ||
100mm | 1.65kg | ||
115mm | 2.6kg | ||
TC umnqamlezo bit | 76mm | 1.2kg | I-TC cross bit yolwakhiwo oluthambileyo ukuya oluphakathi |
90mm | 1.75kg | ||
100mm | 2kg | ||
115mm | 2.8kg | ||
130mm | 3.1kg | ||
150mm | 5kg | ||
Umnqamlezo owenziwe lukhuni | 76mm | 1.15kg | Intwana yeqhosha eliqinileyo lelitye elingadityaniswanga elinamatye |
90mm | 1.68kg | ||
100mm | 2.15kg | ||
115mm | 2.3kg | ||
130mm | 3.15kg | ||
bit iqhosha le-TC | 76mm | 1.78kg | Iqhosha le-TC elincinci lolwakhiwo oluphakathi lwamatye |
90mm | 1.4kg | ||
100mm | 2kg | ||
115mm | 2.8kg | ||
130mm | 4.92kg | ||
Hex Nut | ||||
Ubungakanani | Ubungakanani obungundoqo | Ubude | Ubunzima | Ukuqina |
(mm) | (mm) | (Kg/pc) | (HRC) | |
S-T40 | 65 | 50 | 0.92 | 25-30 |
I-Spherical Collar Nut | ||||
Ubungakanani | Imilinganiselo | Ukutyeba | Usuku lomngxuma. | Ubunzima |
(mm) | (mm) | (mm) | (Kg/pc) | |
S-T40 | 65 | 50 | 0.86 | 290-340 |
Ipleyiti yeAnchor | ||||
Ubungakanani | Imilinganiselo | Ukutyeba | Usuku lomngxuma. | Ubunzima |
(mm) | (mm) | (mm) | (Kg/pc) | |
S-T40 | 115×115 | 20 | 56 | 1.6 |
125×125 | 24 | 56 | 2.4 | |
200×200 | 12 | 56 | 3.28 | |
200×200 | 30 | 56 | 8.5 | |