I-self-drilling anchor system-T40
imininingwane yomkhiqizo
I-anchoring isetshenziswa kakhulu emhubheni wokwesekwa kwangaphambili, emthambekeni, ogwini, emayini, kumaphrojekthi okonga amanzi, Isisekelo sokwakha, ukuqinisa umbhede womgwaqo kanye nokwelashwa okunephutha okufana ne-landslip, i-crack, nobudala bukasinki, ayinakushintshwa endaweni ewumngcingo yokwakha.
UBUHLE
I-Self Drilling I-Hollow Bar Anchor System:
Ihlanganiswe nebha enentambo engenalutho enamathiselwe ne-drill bit eyenza ukubhola. Ibha engenalutho ivumela umoya namanzi ukuba kudlule ngokukhululekile ku-bar ngesikhathi sokumba ukuze kukhishwe imfucumfucu, ngemva kokuba ukubhoboza ekujuleni okudingekayo kuqediwe, i-grout igcwalisa ibha engenalutho ngokusebenzisa ingcindezi yemfuneko yabo futhi ihlanganisa ngokuphelele yonke ibhawudo.
Umbhangqwana:
I-coupler ingasetshenziswa ukuhlanganisa imigoqo engenalutho futhi inwebe ubude bebhawodi, kusho ukuthi ihange linganwetshwa nama-couplers.
Ipuleti namantongomane:
Ipuleti namantongomane afakwe ngokwezidingo zawo zokuklama.
I-Drill bit:
I-drill bit izokhethwa ekukhetheni isimo somhlabathi.
Ibha Yehange Elingenalutho | |||||
Usayizi | I-Dia yangaphandle. | Ngaphakathi Kwakhe. | Ultimate Load | Yield Load | Isisindo |
(mm) | (mm) | (kN) | (kN) | (Kg/m) | |
I-S-T40/20 | 40 | 20 | 539 | 430 | 6.2 |
I-S-T40/16 | 40 | 16 | 660 | 525 | 7.2 |
I-E-T40/22 | 40 | 22 | 539 | 430 | 5.7 |
E-T40/18 | 40 | 18 | 660 | 525 | 6.8 |
Umbhangqwana | ||||
Usayizi | I-Dia yangaphandle. | Ubude | Isisindo | Qaphela |
(mm) | (mm) | (Kg/pc) | ||
I-S-T40 | 54 | 140 | 1.09 | Ngesakhiwo sokubeka uphawu |
57 | 140 | 1.37 | ||
E-T40 | 54 | 140 | 1.11 | Ngaphandle kokubeka uphawu |
57 | 140 | 1.39 | ||
I-Drill Bit | |||
Uhlobo | I-Dia yangaphandle. | Isisindo | Ibanga lesicelo (Iseluleko) |
(mm) | (Kg) | ||
I-cross bit eqinile | 76 mm | 0.90kg | I-cross bit eqinile ukuze kube nezimo zomhlabathi eziminyene kakhulu |
90mm | 1.5kg | ||
100mm | 1.65kg | ||
115 mm | 2.6kg | ||
I-TC cross bit | 76 mm | 1.2kg | I-TC cross bit yokwakheka kwamatshe athambile kuya kokuphakathi |
90mm | 1.75kg | ||
100mm | 2kg | ||
115 mm | 2.8kg | ||
130 mm | 3.1kg | ||
150mm | 5kg | ||
I-cross bit eqinile | 76 mm | 1.15kg | Ibhithi yenkinobho eqinile yedwala elingahlanganisiwe elinamatshe |
90mm | 1.68kg | ||
100mm | 2.15kg | ||
115 mm | 2.3kg | ||
130 mm | 3.15kg | ||
Ibhithi yenkinobho ye-TC | 76 mm | 1.78kg | Ibhithi yenkinobho ye-TC yokwakheka kwamatshe amaphakathi |
90mm | 1.4kg | ||
100mm | 2kg | ||
115 mm | 2.8kg | ||
130 mm | 4.92kg | ||
I-Hex Nut | ||||
Usayizi | Usayizi Obalulekile | Ubude | Isisindo | Ukuqina |
(mm) | (mm) | (Kg/pc) | (HRC) | |
I-S-T40 | 65 | 50 | 0.92 | 25-30 |
I-Spherical Collar Nut | ||||
Usayizi | Ubukhulu | Ubukhulu | Usuku Lomgodi. | Isisindo |
(mm) | (mm) | (mm) | (Kg/pc) | |
I-S-T40 | 65 | 50 | 0.86 | 290-340 |
Ipuleti le-anchor | ||||
Usayizi | Ubukhulu | Ubukhulu | Usuku Lomgodi. | Isisindo |
(mm) | (mm) | (mm) | (Kg/pc) | |
I-S-T40 | 115×115 | 20 | 56 | 1.6 |
125×125 | 24 | 56 | 2.4 | |
200×200 | 12 | 56 | 3.28 | |
200×200 | 30 | 56 | 8.5 | |